YB_Platform/public/common/driver/inc/phy_para.h

#ifndef COMMON_INC_PHY_PARA_H_
#define COMMON_INC_PHY_PARA_H_

#include "ucp_drv_common.h"

#define PHY_SCS_MAX_NUM			4
#define SFN_PERIOD				10000		// 10ms
#define SLOT_SYMBOL_NUM			14

#define SPU_DRV_SM_ADDR			(0x0A4F2000) // (0x0A4D7000) // 
#define SPU_DRV_SM_LEN          (56*1024)    // 56KB

#define PROTO_SEL_ADDR			(SPU_DRV_SM_ADDR+0x0)
#define PROTO_OPT_ADDR			(SPU_DRV_SM_ADDR+0x4)
#define PHY_PARA_ADDR			(SPU_DRV_SM_ADDR+0x8)
#define PHY_CELL_ADDR			(SPU_DRV_SM_ADDR+0x100)

#define ORX_ADJUST_FLAG_ADDR	(SPU_DRV_SM_ADDR+0x140)
#define ORX_ADJUST_VAL_ADDR		(SPU_DRV_SM_ADDR+0x144)

#define STC_TOD_INT_ADDR		(SPU_DRV_SM_ADDR+0x200)
#define STC_RT_ADDR				(SPU_DRV_SM_ADDR+0x204)
#define STC_CTW_EN_ADDR			(SPU_DRV_SM_ADDR+0x208)

#define CPRI_DELAY_ADDR			(SPU_DRV_SM_ADDR+0x210)
#define CPRI_ADVANCE_ADDR		(SPU_DRV_SM_ADDR+0x214)
#define CPRI_TDD_ADVANCE_ADDR	(SPU_DRV_SM_ADDR+0x218)

#define CTC_INT_TYPE_ADDR		(SPU_DRV_SM_ADDR+0x21C)

#define ARM_SFN_VALID_ADDR		(SPU_DRV_SM_ADDR+0x220) // 0xAA not valid, 0x55 valid
#define ARM_SFN_NUM_ADDR		(SPU_DRV_SM_ADDR+0x224)
#define ARM_SFN_FLIP_ADDR		(SPU_DRV_SM_ADDR+0x228)
#define ARM_LOCK_FLAG_ADDR		(SPU_DRV_SM_ADDR+0x22C)

#define ARM_SFN_VALID_FLAG		(0x55)
#define ARM_SFN_NOTVALID_FLAG	(0xAA)

#define CSU_STOP_CMD_ADDR		    (SPU_DRV_SM_ADDR+0x230)
#define CSU_UL_HEADER_DATA_OFFSET	(SPU_DRV_SM_ADDR+0x234)	// ul, the interval of frame header and frame data, ns as unit
#define CSU_RX_TD_SAMPLE		    (SPU_DRV_SM_ADDR+0x238)
#define CSU_TX_ADVANCE_SAMPLE	    (SPU_DRV_SM_ADDR+0x23C)

#define SERDES_INIT_FLAG_ADDR	    (SPU_DRV_SM_ADDR+0x240) // cpri or jesd clk init finished
#define STC_ONEPPS_OUT_ADDR		    (SPU_DRV_SM_ADDR+0x244)

#define CPRI_TX_ADVANCE_PP1S_ADDR	(SPU_DRV_SM_ADDR+0x260)
#define CPRI_RX_ADVANCE_PP1S_ADDR	(SPU_DRV_SM_ADDR+0x264)
#define CPRI_TDD_ADVANCE_PP1S_ADDR	(SPU_DRV_SM_ADDR+0x268)

#define DDR_MONITOR_ENABLE		    (SPU_DRV_SM_ADDR+0x270)	// 开始监测ddr性能
#define DDR_MONITOR_CNT			    (SPU_DRV_SM_ADDR+0x274)

#define JESD_RF_TXOFF2RXON			(SPU_DRV_SM_ADDR+0x278)  // ns as unit
#define JESD_RF_TXON2PP1S			(SPU_DRV_SM_ADDR+0x27C)

#define SLOT_NUM_DEBUG_ADDR		    (SPU_DRV_SM_ADDR+0x300)
#define APE_INT_INFO_ADDR		    (SPU_DRV_SM_ADDR+0x400)

// GPIO JESD TX/RX/ORX bit
#define JESD_CFG_ADDR 		        (SPU_DRV_SM_ADDR+0x1000) // 4KB

#define JESD_RX_CH_PARA				(JESD_CFG_ADDR+0x10)
#define JESD_RX_SAMPLE_RATE			(JESD_CFG_ADDR+0x20)
#define JESD_RX_CLK_RATIO           (JESD_CFG_ADDR+0x24) // byte0: SAM_CLK/sample_clk, byte1: CHA_CLK_sample_clk

#define JESD_ORX_CH_PARA			(JESD_CFG_ADDR+0x30)
#define JESD_ORX_SAMPLE_RATE		(JESD_CFG_ADDR+0x40)
#define JESD_ORX_CLK_RATIO          (JESD_CFG_ADDR+0x44)

#define JESD_TX_CH_PARA				(JESD_CFG_ADDR+0x50)
#define JESD_TX_SAMPLE_RATE			(JESD_CFG_ADDR+0x60)
#define JESD_TX_CLK_RATIO           (JESD_CFG_ADDR+0x64)

#define JESD_TX1_CH_PARA			(JESD_CFG_ADDR+0x70)
#define JESD_TX1_SAMPLE_RATE		(JESD_CFG_ADDR+0x80)
#define JESD_TX1_CLK_RATIO          (JESD_CFG_ADDR+0x84)

#define GPIO_JESD_TRIGGER_BIT	    (JESD_CFG_ADDR+0x100)
#define GPIO_JESD_TRIGGER_VALID	    (JESD_CFG_ADDR+0x110)

#define GPIO_JESD_RF_BIT		    (JESD_CFG_ADDR+0x120)
#define GPIO_JESD_RF_VALID		    (JESD_CFG_ADDR+0x130)

#define PHY_CELL_FLAG			0xAFAFAFAF
#define ARM_SFN_UPDATE_FLAG		0xA5A5A5A5

#define ENABLE_SFNCAL								// 使能与arm的帧号校准功能
//#define DISTRIBUTED_BS
//#define INTEGRATION_BS

//#define GPS_PP1S_SYNC
#define GPS_LTE_OFFSET			0 // 700		// us
#define GPS_NR_OFFSET			0 // 2700		// us
#define LTE_NR_OFFSET			0 // 2000		// us

#define SCS_MAX_NUM		2

#define MTIMER_INTEGRATED_MAX_NUM		4
#define MTIMER_DISTRIBUTED_MAX_NUM		2


typedef enum _tagScsId
{
	SCS_1st_MTIMER_ID = 0,
	SCS_2nd_MTIMER_ID = 1,
	MTIMER_NULL		  = 0xFFFF
}cellScsId;

typedef enum _tagMtimerDistributeOptId
{
	MTIMER_CPRI_ID	= 0,
	MTIMER_ECPRI_ID
}mtimerDistributeOptId;
	
typedef enum _tagMtimerIntegrateOptId
{
	MTIMER_JESD_RX0_ID = 0,
	MTIMER_JESD_RX1_ID,
	MTIMER_JESD_TX0_ID,
	MTIMER_JESD_TX1_ID
}mtimerIntegrateOptId;

typedef enum _tagAPEIntInfoId
{
	APE_INT_TX_SLOT	= 0,
	APE_INT_RX_SLOT	= 1,
	APE_INT_STC_0US = 2,
	APE_INT_STC		= 3,
	APE_INT_MAXNUM	= 8
}numAPEIntInfoId;

typedef enum _tagCtcIntType
{
	CTC_INT_TYPE_NULL = 0,
	CTC_INT_TYPE_CAL_SCS0 = 1,
	CTC_INT_TYPE_CAL_SCS1 = 2,
}numCtcIntType;

typedef enum _tagProtocolID
{
	PROTOCOL_NULL = 0,
	PROTOCOL_CPRI = 1,
	PROTOCOL_ECPRI,
	PROTOCOL_JESD
}numProtoID;
#define PROTO_OPTION_NULL	0

typedef enum _tagCpriOptionID
{
	CPRI_OPTION_7 = 7,
	CPRI_OPTION_8 = 8,
	CPRI_OPTION_9 = 9,
	CPRI_OPTION_10 = 10
}CpriOptID;

// cpri ctrl选项
typedef enum _tagCpriCtrlType
{
	CPRI_RS_FEC_DISABLE = 0,
	CPRI_RS_FEC_ENABLE  = 1,
}CpriCtrlType;

typedef enum _tagEcpriOptionID
{
	ECPRI_OPTION_10G = 10,
	ECPRI_OPTION_25G = 25
}EcpriOptID;

typedef enum _tagJesdOptionID
{
	JESD_OPTION_204B = 0,
	JESD_OPTION_204C = 1
}JesdOptID;

typedef enum _tagScsID
{
	LTE_SCS_ID = 0,
	NR_SCS_30K,
	NR_SCS_60K,
	NR_SCS_120K,
	SCS_NULL	= 0xFFFF
}numScsID;

typedef enum _tagFrameType
{
	FDD_MODE = 0, 
	TDD_MODE = 1,
	TDD_2500US_DOUBLE = 2,
	FRAME_NULL = 0xFFFF
}numFrameType;

typedef struct _tagCoreInt
{
	uint32_t intNum;
	uint32_t intCnt;
}stCoreInt;

typedef struct _tagPhyScsPara
{
	uint16_t scsId;
	uint16_t runCoreId;
	uint16_t mtimerId;
	uint16_t gpsOffset;	// us as unit
	uint16_t slotPeriod;
	uint16_t slotNumOfTdd;
	uint16_t slotNumOfSfn;
	uint16_t reserved;
	uint32_t rxSlotNum;
	uint32_t txSlotNum;
	uint32_t rxSfnNum;
	uint32_t txSfnNum;
	uint32_t rxSetVal;
	uint32_t txSetVal;
	uint32_t txSlotIntFlag;
	uint32_t rxSlotIntFlag;
//	UINT64 rxSlotStcCnt;
//	UINT64 txSlotStcCnt;
}stPhyScsPara;

typedef struct _tagFrontHaulDrvPara
{
	uint32_t protocolSel;	// numProtoID
	uint32_t rateOption;	// CpriOptID/EcpriOptID
	uint32_t mapOption;		// CpriMapType
    uint32_t ctrlOption;	// ctrlOption    
}stFrontHaulDrvPara;

typedef struct phy_timer_config_ind_t
{
    uint32_t frameType;		//0:FDD, 1:TDD, 2:TDD(双周期DDDSUDDSUU)
    uint32_t scsId;
	uint32_t runCoreId;		// 此次需要建小区的ape core id，bitmap方式，bit0对应ape0，bit1对应ape1，。。。
    uint16_t bandWidth;     //带宽:5M,10M,15M,20M,25M,30M,40M,50M,60M,80M,100M
    uint16_t t_period;      //timer周期=t_us*num_tti, 500us, 625us, 1000us, 1250us, 2500us, 5000us, 10000us, 20000us


    uint16_t t_us;          //物理层时隙定时长度, 125us, 250us, 500us, 1000us
    uint8_t  num_tti;         //timer周期内时隙的个数5,10,20,40,80
    uint8_t  num_tti_per_sfn; //一个SFN内的时隙个数


    uint8_t num_t_dl[2];       //下行时隙个数
    uint8_t num_t_dl_symb[2];  //S时隙内下行符号个数
    uint8_t num_t_ul_symb[2];  //S时隙内上行符号个数
    uint8_t num_ants[2];       //天线个数
}phy_timer_config_ind_t;

typedef struct _tagPhyDelCell
{
    uint32_t scsId;
	uint32_t delCoreId;		// 此次需要删除小区的ape core id，bitmap方式，bit0对应ape0，bit1对应ape1，。。。
}stPhyDelCell;

typedef struct _tagPhyCellPara
{
	uint32_t flag;
	phy_timer_config_ind_t phyPara;
}stPhyCellPara;

typedef struct _tagSfnPara
{
	uint32_t	scsId;
	uint32_t	slotPeriod;			// slot period, us as unit
	uint32_t	tddPeriod;			// tdd period, us as unit
	uint32_t	tddSlotNum;			// slot num of every tdd period
	uint32_t	slotMaxNum;
	uint32_t	ctcIntFlag;
	uint32_t	txSlotNum;
	uint32_t 	rxSlotNum;
	uint32_t 	txSfnNum;
	uint32_t 	rxSfnNum;
	uint32_t	symbolMaxNum;
	uint32_t	txSymbolNum;
	uint32_t 	txSlotIntCnt;
	uint32_t 	rxSlotIntCnt;
	uint32_t	txSymbolIntCnt;
	uint64_t 	txSlotTiming;
	uint64_t 	rxSlotTiming;
}stSfnPara;

typedef enum _tagCpriMapType
{
	OTIC_MAP_FIGURE10 = 0, //option8,双模，4T4R NR小区 + 2T2R LTE小区
	OTIC_MAP_FIGURE12,     //option8,NR 4T4R单小区	
	OTIC_MAP_FIGURE16,     //option10,NR 4T4R的2小区
    OTIC_MAP_8NR_8LTE      //RJ Mapping(2*4TR NR + 4*2TR LTE) 
}CpriMapType;

typedef enum _tagCpriMode
{
	NR_MODE = 0,
	LTE_MODE
}CpriMode;


void sfn_para_init(void);

void drv_sm_init();

void phy_para_init(uint32_t protocol, uint32_t option);
void phy_scs_para_init(int32_t scsId);

int32_t get_protocol_sel();
int32_t get_protocol_opt();

void set_tx_slot_intflag(uint8_t scs, int32_t flag);

int32_t get_tx_slot_intflag(uint8_t scs);

void set_rx_slot_intflag(uint8_t scs, int32_t flag);

int32_t get_rx_slot_intflag(uint8_t scs);

int32_t send_cpri_csu_stop_cmd();

int32_t send_cpri_csu_start_cmd();

int32_t get_tx_rx_interval();

#endif /* COMMON_INC_PHY_PARA_H_ */