#ifndef COMMON_INC_PHY_PARA_H_
#define COMMON_INC_PHY_PARA_H_

#include "ucp_drv_common.h"

#define PHY_SCS_MAX_NUM			4
#define SFN_PERIOD				10000		// 10ms

#define PROTO_SEL_ADDR			(0x0A4D7000)
#define PROTO_OPT_ADDR			(0x0A4D7004)
#define PHY_PARA_ADDR			(0x0A4D7008)
#define PHY_CELL_ADDR			(0x0A4D7100)

#define STC_TOD_INT_ADDR		(0x0A4D7200)
#define STC_RT_ADDR				(0x0A4D7204)
#define STC_CTW_EN_ADDR			(0x0A4D7208)

#define CPRI_DELAY_ADDR			(0x0A4D7210)
#define CPRI_ADVANCE_ADDR		(0x0A4D7214)
#define CPRI_TDD_ADVANCE_ADDR	(0x0A4D7218)

#define CTC_INT_TYPE_ADDR		(0x0A4D721C)

#define ARM_SFN_VALID_ADDR		(0x0A4D7220) // 0xAA not valid, 0x55 valid
#define ARM_SFN_NUM_ADDR		(0x0A4D7224)
#define ARM_SFN_FLIP_ADDR		(0x0A4D7228)
#define ARM_LOCK_FLAG_ADDR		(0x0A4D722C)

#define ARM_SFN_VALID_FLAG		(0x55)
#define ARM_SFN_NOTVALID_FLAG	(0xAA)

#define CSU_STOP_CMD_ADDR		(0x0A4D7230)
#define CSU_UL_HEADER_DATA_OFFSET	(0x0A4D7234)	// ul, the interval of frame header and frame data, ns as unit
#define CSU_RX_TD_SAMPLE		(0x0A4D7238)
#define CSU_TX_ADVANCE_SAMPLE	(0x0A4D723C)

#define SERDES_INIT_FLAG_ADDR	(0x0A4D7240) // cpri or jesd clk init finished
#define STC_ONEPPS_OUT_ADDR		(0x0A4D7244)

#define DDR_MONITOR_ENABLE		(0x0A4D7250)	// 开始监测ddr性能
#define DDR_MONITOR_CNT			(0x0A4D7254)

#define CPRI_TX_ADVANCE_PP1S_ADDR	(0x0A4D7260)
#define CPRI_RX_ADVANCE_PP1S_ADDR	(0x0A4D7264)
#define CPRI_TDD_ADVANCE_PP1S_ADDR	(0x0A4D7268)

#define SLOT_NUM_DEBUG_ADDR		(0x0A4D7300)
#define APE_INT_INFO_ADDR		(0x0A4D7400)

#define PHY_CELL_FLAG			0xAFAFAFAF
#define ARM_SFN_UPDATE_FLAG		0xA5A5A5A5

#define ENABLE_SFNCAL								// 使能与arm的帧号校准功能
//#define DISTRIBUTED_BS
//#define INTEGRATION_BS

//#define GPS_PP1S_SYNC
#define GPS_LTE_OFFSET			0 //700			// us
#define GPS_NR_OFFSET			0 //2700		// us
#define LTE_NR_OFFSET			0 //2000		// us

#define SCS_MAX_NUM		2

#ifdef DISTRIBUTED_BS
#define MTIMER_MAX_NUM		2
#endif
#ifdef INTEGRATED_BS
#define MTIMER_MAX_NUM		4
#endif

typedef enum _tagScsId
{
	SCS_1st_MTIMER_ID = 0,
	SCS_2nd_MTIMER_ID = 1,
	MTIMER_NULL		  = 0xFFFF
}cellScsId;

typedef enum _tagMtimerDistributeOptId
{
	MTIMER_CPRI_ID	= 0,
	MTIMER_ECPRI_ID
}mtimerDistributeOptId;
	
typedef enum _tagMtimerIntegrateOptId
{
	MTIMER_JESD_RX0_ID = 0,
	MTIMER_JESD_RX1_ID,
	MTIMER_JESD_TX0_ID,
	MTIMER_JESD_TX1_ID
}mtimerIntegrateOptId;

typedef enum _tagAPEIntInfoId
{
	APE_INT_TX_SLOT	= 0,
	APE_INT_RX_SLOT	= 1,
	APE_INT_STC_0US = 2,
	APE_INT_STC		= 3,
	APE_INT_MAXNUM	= 8
}numAPEIntInfoId;

typedef enum _tagCtcIntType
{
	CTC_INT_TYPE_NULL = 0,
	CTC_INT_TYPE_CAL = 1
}numCtcIntType;

typedef enum _tagProtocolID
{
	PROTOCOL_NULL = 0,
	PROTOCOL_CPRI = 1,
	PROTOCOL_ECPRI,
	PROTOCOL_JESD
}numProtoID;
#define PROTO_OPTION_NULL	0

typedef enum _tagCpriOptionID
{
	CPRI_OPTION_7 = 7,
	CPRI_OPTION_8 = 8,
	CPRI_OPTION_9 = 9,
	CPRI_OPTION_10 = 10
}cpriOptID;

typedef enum _tagEcpriOptionID
{
	ECPRI_OPTION_10G = 1,
	ECPRI_OPTION_25G = 2
}ecpriOptID;

typedef enum _tagScsID
{
	LTE_SCS_ID = 0,
	NR_SCS_30K,
	NR_SCS_60K,
	NR_SCS_120K,
	SCS_NULL	= 0xFFFF
}numScsID;

typedef struct _tagCoreInt
{
	uint32_t intNum;
	uint32_t intCnt;
}stCoreInt;

typedef struct _tagPhyScsPara
{
	uint16_t scsId;
	uint16_t runCoreId;
	uint16_t mtimerId;
	uint16_t gpsOffset;	// us as unit
	uint16_t slotPeriod;
	uint16_t slotNumOfTdd;
	uint16_t slotNumOfSfn;
	uint16_t reserved;
	uint32_t rxSlotNum;
	uint32_t txSlotNum;
	uint32_t rxSfnNum;
	uint32_t txSfnNum;
	uint32_t rxSetVal;
	uint32_t txSetVal;
	uint32_t txSlotIntFlag;
	uint32_t rxSlotIntFlag;
//	UINT64 rxSlotStcCnt;
//	UINT64 txSlotStcCnt;
}stPhyScsPara;

typedef struct phy_timer_config_ind_t
{
    uint32_t scsId;
	uint32_t runCoreId;		// 此次需要建小区的ape core id，bitmap方式，bit0对应ape0，bit1对应ape1，。。。
    uint16_t bandWidth; 	//带宽:5M,10M,15M,20M,25M,30M,40M,50M,60M,80M,100M
    uint16_t t_period;  	//timer周期=t_us*num_t, 500us, 625us, 1000us, 1250us, 2500us, 5000us, 10000us, 20000us

    uint16_t t_us;			//物理层时隙定时长度, 125us, 250us, 500us, 1000us
    uint8_t num_t;			//timer周期内时隙的个数5,10,20,40,80
    uint8_t num_t_per_sfn;	//一个SFN内的时隙个数

	uint8_t num_t_dl; 		//下行时隙个数
    uint8_t num_t_dl_symb;	//时隙内下行符号个数
    uint8_t num_t_ul_symb;	//时隙内上行符号个数
    uint8_t num_ants;		//天线个数
}phy_timer_config_ind_t;

typedef struct _tagPhyDelCell
{
    uint32_t scsId;
	uint32_t delCoreId;		// 此次需要删除小区的ape core id，bitmap方式，bit0对应ape0，bit1对应ape1，。。。
}stPhyDelCell;

typedef struct _tagPhyCellPara
{
	uint32_t flag;
	phy_timer_config_ind_t phyPara;
}stPhyCellPara;

typedef struct _tagSfnPara
{
	uint32_t	scsId;
	uint32_t	slotPeriod;			// slot period, us as unit
	uint32_t	tddPeriod;			// tdd period, us as unit
	uint32_t	tddSlotNum;			// slot num of every tdd period
	uint32_t	slotMaxNum;
	uint32_t	ctcIntFlag;
	uint32_t	txSlotNum;
	uint32_t rxSlotNum;
	uint32_t txSfnNum;
	uint32_t rxSfnNum;
	uint32_t txSlotIntCnt;
	uint32_t rxSlotIntCnt;
	uint64_t txSlotTiming;
	uint64_t rxSlotTiming;
}stSfnPara;

void sfn_para_init(void);

void phy_para_init(int32_t protocol, int32_t option);
void phy_scs_para_init(int32_t scsId);

int32_t get_protocol_sel();
int32_t get_protocol_opt();

void set_tx_slot_intflag(uint8_t scs, int32_t flag);

int32_t get_tx_slot_intflag(uint8_t scs);

void set_rx_slot_intflag(uint8_t scs, int32_t flag);

int32_t get_rx_slot_intflag(uint8_t scs);

void get_cpri_delay(uint32_t* delay);

void get_cpri_advance(uint32_t* advance);

int32_t send_cpri_csu_stop_cmd();

int32_t send_cpri_csu_start_cmd();


#endif /* COMMON_INC_PHY_PARA_H_ */