/****************************************************************** * @file ucp_mem_def.h * @brief: 两片UCP的内存分布头文件 * @author: xuekun.zhang * @Date 2021年1月5日 * COPYRIGHT NOTICE: (c) smartlogictech. All rights reserved. * Change_date Owner Change_content * 2021年1月5日 xuekun.zhang create file *****************************************************************/ #ifndef UCP_MEM_DEF_H #define UCP_MEM_DEF_H //！命名宏定义时需要注意UCP使用的地址 /*********************************UCP************************************************/ #define SM0_BASE (0x09D00000)//1M #define SM1_BASE (0x09E00000)//1M #define SM2_BASE (0x09F00000)//1.5M #define SM3_BASE (0x0A080000)//1.5M #define SM4_BASE (0x0A200000)//1.5M #define SM5_BASE (0x0A380000)//1.5M //len define //SM0 //SM1 #define TIME_DATA_SLOT_LEN (0x0003c000) //61440*4byte = 240k //SM2 #define TRANSMITTER_OUT_LEN (0x0003c000) //TODO:确定实际长度 //SM3 #define SM3_NR_PUCCH_LUT_LEN (0x00040000) //256K #define SM3_PHY_MSG_BUFFER_LEN (0x00000400) //1K //DDR #define TRACE_GRP_LEN (0x00000200) //128Word /************************************SM0--1M*************************************************/ #define RECEIVER_SYNC_CFG_BASE (SM0_BASE) #define RECEIVER_SYMB_CFG_BASE (RECEIVER_SYNC_CFG_BASE + 0x100) #define RECEIVER_BIT_CFG_BASE (RECEIVER_SYMB_CFG_BASE + 0x100) /************************************SM1---1M ***********************************************/ #define RECEIVER_SYNC2SYMB_BUFFER0_ADDR (SM1_BASE) #define RECEIVER_SYNC2SYMB_BUFFER1_ADDR (RECEIVER_SYNC2SYMB_BUFFER0_ADDR + TIME_DATA_SLOT_LEN) #define RECEIVER_SYNC2SYMB_BUFFER2_ADDR (RECEIVER_SYNC2SYMB_BUFFER1_ADDR + TIME_DATA_SLOT_LEN) #define RECEIVER_SYNC2SYMB_BUFFER3_ADDR (RECEIVER_SYNC2SYMB_BUFFER2_ADDR + TIME_DATA_SLOT_LEN) #define RECEIVER_SYNC2SYNC_FIRST_INF_ADDR (RECEIVER_SYNC2SYMB_BUFFER3_ADDR + TIME_DATA_SLOT_LEN) //LEN: sizeof(receiver_sync_status_t) /************************************SM2--1.5M***********************************************/ #define TRANSMITTER_OUT (SM2_BASE) #define TRANSMITTER_BASE (TRANSMITTER_OUT) //4k对齐 /************************************SM3--1.5M***********************************************/ #define SM3_PHY_MSG_BUFFER_ADDR (SM3_BASE) #define SM3_PHY_TASKS_MGR_ADDR (SM3_PHY_MSG_BUFFER_ADDR + SM3_PHY_MSG_BUFFER_LEN) /************************************SM4--1.5M***********************************************/ //TODO:地址规划 #define RECEIVER_OUT1 (SM4_BASE) #define RECEIVER_OUT2 (SM4_BASE + 0x4000) #define RECEIVER_OUT3 (SM4_BASE + 0x8000) /************************************SM5--1.5M***********************************************/ #define RECEIVER_BASE (SM5_BASE) //4k对齐 /**************************************DDR***************************************************/ #define DDR_PHY_BASE (0x6BC00000) //共579M可用0x6BC00000-0x8FFFFFFF #define DDR_ERROR_RECORD_CNT_ADDR (0x79FF8000) #define DDR_STATE_RECORD_CNT_ADDR (0x79FFc000) // #define JESD_NRFDD_TX_SLOT_EVEN_DATA_ADDR (0x60F00000) //0x1E0000 #define JESD_NRFDD_TX_SLOT_ODD_DATA_ADDR (0x610E0000) //0x1E0000 #define JESD_NRFDD_RX_SLOT_EVEN_DATA_ADDR (0x6BC00000) //!!!DDR_PHY_BASE 0x1E0000 #define JESD_NRFDD_RX_SLOT_ODD_DATA_ADDR (0x6BDE0000) // 0x1E0000 #define JESD_NRFDD_RX_SLOT_SRC0_DATA_ADDR (0x6BFC0000) // 0x1E0000 用于暂存数据供first_sync处理 #define JESD_NRFDD_RX_SLOT_SRC1_DATA_ADDR (0x6C1A0000) // 0x1E0000 用于暂存数据供first_sync处理 #define SOURCE_DATA_DDR_ADDR (0x84C01000) #define SOURCE_DATA_FLAG_DDR_ADDR (0x84C00000) // SPU READ FLAG #define SOURCE_DATA_BYTE_LENGTH (16016) #define TRACE_RECEIVER_ADDR (0x88700000) #define TRACE_RECV_INIT_ADDR (TRACE_RECEIVER_ADDR) //0x88700000 #define TRACE_SLOTIND_ADDR (TRACE_RECV_INIT_ADDR + TRACE_GRP_LEN) //0x88700200 #define TRACE_RECEIVER_SYNC_ADDR (TRACE_SLOTIND_ADDR + TRACE_GRP_LEN) // 0x88700400 #define TRACE_RECEIVER_SYMB_ADDR (TRACE_RECEIVER_SYNC_ADDR + TRACE_GRP_LEN)// 0x88700600 #define TRACE_RECEIVER_BIT_ADDR (TRACE_RECEIVER_SYMB_ADDR + TRACE_GRP_LEN)// 0x88700800 #define TRACE_TESTTASK_ADDR (TRACE_RECEIVER_BIT_ADDR + TRACE_GRP_LEN) // 0x88700a00 #define TRACE_RECEIVER_SYNC_FIRST_ADDR (TRACE_TESTTASK_ADDR + TRACE_GRP_LEN) // 0x88700c00 #define TRACE_RECEIVER_SYNC_FINE_ADDR (TRACE_RECEIVER_SYNC_FIRST_ADDR + TRACE_GRP_LEN) // 0x88700e00 #define TRACE_TRANSMITTER_ADDR (TRACE_RECEIVER_SYNC_FINE_ADDR + TRACE_GRP_LEN) // 0x88701000 #define TRACE_TRANS_INIT_ADDR (TRACE_TRANSMITTER_ADDR + TRACE_GRP_LEN) // 0x88701200 #endif